Shop

XRay Oil Pressure Gauge Kit for BMW R nine T family (Since 2017)

162,00 + IVA
DELIVERY COSTS NOT INCLUDED

Clear

Since 2017 BMW has strangely removed from all his R nine T 1200 model range the common red “low pressure“ warning light on the dashboard that warns of low engine oil pressure thus making it impossible to detect either low oil quantity or insufficient oil pressure that could lead to catastrophic consequences on the engine.

XRay in its typical innovative mentality has decided to solve this design oversight by making a simple to install “Oil Pressure Gauge Kit” specific for the engines of the R nineT 1200 models from 2017 on.

This engine saving device is “plug and play” and has a sleek design and perfect finish. It has been designed and entirely made in Italy.

 

This XRay Oil Pressure Gauge kit is suitable for the following models:

  • BWM R Nine T Regular (2017/-)
  • BWM R Nine T Scrambler (2017/-)
  • BWM R Nine T Urban G/S (2017/-)
  • BWM R Nine T Pure (2017/-)
  • BWM R Nine T Racer (2017/-)

FEATURES

  • Essential for monitoring of engine oil pressure on all BMW R Nine T models
  • Made with sleek design, perfect finish and top materials
  • Designed, engineered and made in Italy
  • Two years warranty
  • Installation instructions included in kit
  • Available in both black or white dial gauges (you can choose selecting the link below)

 

Description

Oil Pressure Gauge Kit for BMW R nineT model range – The correct oil pressure at 80°/90° Celsius (correct engine running temperature) should be a minimum of 12 psi (0,8 bar) at idle and about 51 psi (3,5 bar) at 4.000 rpm according to BMW workshop manual. All fittings are made out of stainless steel. Every line is made with a braided stainless steel hose covered by a black heatshrink sheat and it is individually pressure tested.

The oil pressure gauges have the case made in stainless steel and are black powder coated and they are also silicone filled (instead of glycerine) thus being able to work properly at below zero temperatures while the reading is not affected by vibrations. The mounting brackets are carved from solid aluminum and are black anodized. Installation is very simple and it is “plug and play”. The mounting takes place by simply removing the M12x1,5 allen head oil plug screw located on left lower engine side and replacing it with our special stainless steel adapter that is connected  to our braided stainless steel black hose. This line is therefore connected to our stainless steel special engine adapter at one side and to our oil pressure silicon filled gauge to the other side. This line has got two special stainless steel 90° fittings, one is fixed while the other one is swivelable to allow a simple and straight forward installation. The fixed 90° fitting is usually connected to our special stainless steel engine adapter and the swivelable 90° one is connected to the oil gauge (with and optimal 90° angle in relation to the position of the mounting bracket) and the possibility to rotate it allows an always correct alignment of the two ends of the line.

Our oil pressure gauge mounting bracket is carved from solid aluminum and it is installed on the left engine side near the cam cover using a stainless steel button head screw. It is cleverly held in place by the specially designed anti-rotation bracket connected to the main supporting bracket with a matching stainless steel button head screw. In addition to this our mounting bracket has a stainless steel grab screw to block gauge in position after having correctly aligned it. Once the gauge is inserted and blocked in our aluminum bracket, from top down the best routing of the line is through the “Y” shaped cross bone of the bike frame and then down alongside the engine cylinder and belt cover (line is kept in place with the use of the provided aluminum rubber covered clamp) to the engine oil adapter at an angle of about 45° in between radiator line and engine casing. You can see pictures in product gallery. The XRay oil pressure gauge kit will be an essential engine saving device for the well being and long life of your boxer engine.

TECHNICAL HIGHLIGHTS

TECHNICAL HIGHLIGHTS

  • All fittings machined out of stainless steel
  • Each individual braided stainless steel black heatshrink covered oil line is pressure tested
  • Oil pressure gauges have a black stainless steel case and are silicone filled rather than glycerine to be able to work properly at below zero temperatures.
  • Vibration proof extreme reading precision
  • Sleek design and perfect finish
  • Two years warranty
Packaging dimension

Packaging dimension

Packaging dimension for our XRay Oil Pressure Gauge Kit are: cm 18,5 x 13,5 x 8 H

Weight of package is kg. 0,325

Comptability

Comptability

Comptability: This xRay Oil Pressure Gauge Kit can be installed on all R Nine T 1200 models only from 2017 on!

  • BWM R Nine T Regular (2017/-)
  • BWM R Nine T Scrambler (2017/-)
  • BWM R Nine T Urban G/S (2017/-)
  • BWM R Nine T Pure (2017/-)
  • BWM R Nine T Racer (2017/-)